Differences

This shows you the differences between two versions of the page.

--- analyzer:screenshots [2009/04/08 23:11] – sestst
+++ analyzer:screenshots [2018/11/03 02:59] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== Protocol Analyzer ======
-These are screen shots from the [[analyzer:start|Protocol Analyzer]]-tool which is designed for analyzing and decoding slow pulse based protocols.
+These are screen shots from the [[analyzer:start|Protocol Analyzer]]-tool which is a tool designed for analyzing and decoding slow pulse based protocols.
 ===== Main Window =====
-This is the main window with two JVC-protocol messages received, and the corresponding raw samples.
+This is the main window with a JVC-protocol messages received, and the corresponding raw samples.
-{{:analyzer:pa_main.png|Analyzer main window}}
+{{:analyzer:manual:main_window.png|Analyzer main window}}
 ===== Raw Samples =====
 This is the raw sample screen from the listing above with the flank detectors interpretation and pulse length statistics.
-{{:analyzer:pa_raw.png|Raw sample screen}}
+{{:analyzer:manual:udecoded1.png|Raw sample screen}}
-This is the same signal but zoomed in on two pulses for detailed analysis:
-{{:analyzer:pa_rawzoom.png|Zoom on raw sample screen}}
 ===== Decoded Samples =====
 When a message is decoded by a protocol parser, the real protocol parameters is presented when the line is selected. Here is an example of the Pronto-interpretation of a received message:
 {{:analyzer:pa_pronto.png| Pronto version of a Nexa message}}
@@ Line 20: / Line 19: @@
 This is the settings dialog, where the pulse analyzer is configured:
-{{:analyzer:pa_settings.png| Settings Dialog}}
+{{:analyzer:manual:audio_settings.png| Settings Dialog}}
 ===== Decoder configuration =====