Differences

This shows you the differences between two versions of the page.

--- audioprotocolparser [2008/10/12 20:46] – created sestst
+++ audioprotocolparser [2018/11/03 02:59] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-{{port64.png|}}
+{{::server:hw64.png?nolink|}}
 ====== AudioProtocolParser ======
-This module is a part of the [[NetHomeServer]]. The AudioProtocolParser is not yet documented.
+This module is a part of the [[:start|NetHomeServer]]. The AudioProtocolParser is one of the core Items in NetHomeServer. It allows you to connect an IR-receiver or a digital radio receiver to the microphone input and decode the signals. Examples of how to build such receivers can be found [[homehwrec|here]].
+This Item receives the data from the audio input, and recreates a digital signal. This digital signal is then passed on to a list of protocol decoders which can decode the digital signal.
+The recreation of the digital signal may require some calibration of the settings to match the input signal. The principles for this is described [[analyzer:theory|here]]. Normally you would use the [[analyzer:start|ProtocolAnalyzer]]-tool to find the correct settings for these parameters
 ===== Attributes =====
-  * **Decoders** //[get] [set]//
+  * **Decoders** //[get] [set]// List of protocol decoders to activate. Currently the following are avaliable: //RC6,RC5,JVC,Pioneer,UPM,Nexa,NexaL,Deltronic,X10,Pronto,Waveman,RisingSun,NexaFire//
-  * **SourceNumber** //[get] [set]//
+  * **SourceName** //[get] [set]// The name of the audio input channel
-  * **Channel** //[get] [set]//
+  * **Channel** //[get] [set]// Which channel of the audio input to use: Left, Right or Mono. Normally Mono for a microphone input.
-  * **FlankSwing** //[get] [set]//
+  * **FlankSwing** //[get] [set]// The size of the input signal, see [[analyzer:theory|description]]
-  * **FlankLength** //[get] [set]//
+  * **FlankLength** //[get] [set]// The length if the flanks, see [[analyzer:theory|description]]
-  * **FlankHoldoff** //[get] [set]//
+  * **FlankHoldoff** //[get] [set]// Can be left at 1
-  * **UseFilter** //[get] [set]//
+  * **UseFilter** //[get] [set]// true or false. Set to true if the input signal is noisy.
-  * **Received** //[get]//
+  * **Received** //[get]// Counts how many messages has been received and decoded
 ===== Actions =====
 ==== See also ====
-[[NetHomeServer]]
+[[:start|NetHomeServer]],[[analyzer:start|ProtocolAnalyzer]]