Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
cul [2010/07/26 20:56]
sestst created
cul [2018/11/03 02:59] (current)
Line 1: Line 1:
-{{ :cul110.jpg | CUL Radio Transceiver}}+{{ :cultotal.jpg | CUL Radio Transceiver}}
  
 ====== NetHomeServer CUL Connection ====== ====== NetHomeServer CUL Connection ======
-CUL 433 is a generic radio transceiver with a CPU and a radio transceiver circuit. ​+[[http://​busware.de/​tiki-index.php?​page=CUL|CUL 433]] is a generic radio transceiver with a CPU and a radio transceiver circuit, which is manufactured and sold by [[http://​shop.busware.de/​|busware.de]]. The CUL device connects to a PC with an USB-connection. The 433MHz band is used by a many remote switches and wireless thermometers,​ so with a radio transmitter on this band a lot of devices can be controlled.
  
-NetHomeServer interfaces with the CUL transceiver via the [[cultransceiver | CULTransceiver]]-interface module using specific NetHome firmware ​on the CUL stick+The CUL hardware supports both reception and transmission,​ but currently only transmission is fully supported via NetHomeServer. I have not been able to get good enough quality on the reception yet. 
 + 
 +===== Firmware ===== 
 +The CUL 433 device requires firmware (for the on board ATMega32U4 processor). There is a separate NetHome project for firmware for this device and this is available as open source (GPL2). The firmware is a generic puls sender/​pulse receiver without any internal decoders. The decoders/​encoders are in the NetHomeServer,​ and the CUL-device is used to send the encoded messages and to receive the raw pulse trains to be decoded in the NetHomeServer. 
 + 
 +Instructions on how to install the firmware can be found [[installculfirmware|here]]. 
 + 
 +===== Controlled Devices ===== 
 +NetHomeServer interfaces with the CUL transceiver via the [[cultransceiver | CULTransceiver]]-Item. Via the CUL device the Nexa and X10-devices can be controlled and via Pronto codes virtually and device that uses pulse encoding ​on the 433MHz band. 
 + 
 +The CUL 433 can also tap in on the [[powermid|PowerMid radio protocol]], enabling it to also send the messages as IR and thereby controlling appliances like DVD-Players.
  
 ===== NetHomeServer Modules ===== ===== NetHomeServer Modules =====
 The CUL-Related objects in the NetHomeServer are: The CUL-Related objects in the NetHomeServer are:
-  * [[fhz1000pcport]] - Connects with the hardware interface module +  * [[cultransceiver | CULTransceiver]] - Connects with the hardware interface module
-NetHomeServer-actions.+
 ===== Where to buy ===== ===== Where to buy =====
 +[[http://​shop.busware.de/​product_info.php/​products_id/​44 | busware.de online shop]]
  
  

Personal Tools