User Tools

Site Tools


deltronicremapbutton

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
deltronicremapbutton [2014/01/05 17:36] – created seststdeltronicremapbutton [2018/11/03 02:59] (current) – external edit 127.0.0.1
Line 6: Line 6:
 If the commands will not result in signalling on the same radio band, you can set it to 0. If the commands will not result in signalling on the same radio band, you can set it to 0.
  
 +The button supports disabling. When it is disabled it will not execute the commands when the buttons are pressed. This is useful in combination with timers.
 + 
 ===== Attributes ===== ===== Attributes =====
-  * **State** //[get]// +  * **State** //[get]// If the remap button is enabled or disabled
   * **Button** //[get] [set]// Which button to respond to (A - D)   * **Button** //[get] [set]// Which button to respond to (A - D)
   * **Address** //[get] [set]// Address of the remote (0-63)   * **Address** //[get] [set]// Address of the remote (0-63)
-  * **OnCommand** //[get] [set]//  +  * **OnCommand** //[get] [set]// Command to be executed when you press the on button 
-  * **OffCommand** //[get] [set]//  +  * **OffCommand** //[get] [set]// Command to be executed when you press the off button  
-  * **HoldOffTime** //[get] [set]// +  * **HoldOffTime** //[get] [set]// Se above
 ===== Actions ===== ===== Actions =====
   * **on**     * **on**  
deltronicremapbutton.1388939781.txt.gz · Last modified: 2018/11/03 02:57 (external edit)