This module is a part of the NetHomeServer. The FHZ1000PcPort is used to communicate with a hardware device called FHZ1000Pc. The FHZ1000Pc gives access to the FS20 radio protocol which is used to control and monitor devices like dimmers, lamps, heating and switches.

The FHZ1000Pc is connected to the server via USB. The FHZ1000PcPort will send any received FS20 radio messages as FS20Event-events on the NetHomeServer event bus. Received FS20Command-events will be sent as FS20 radio messages. This module is build using the SHZ1000PC-class.

• State [get] Connected or Disconnected, indicates if the port has found the hardware device.
• ReceivedMessages [get] Number of FS20-messages that has been received.
• SentMessages [get] Number of FS20-messages that has been received.
• Command3 [get] [set] The third Command to be executed at the action of the Scene. Se above for syntax.
• Command4 [get] [set] The fourth Command to be executed at the action of the Scene. Se above for syntax.

• Action This command activates the Scene.
• Off Explicitly calls the defined OffCommand. This does not affect the schedule.

Command Port Syntax