Differences

This shows you the differences between two versions of the page.

--- fhz1000pcport [2008/03/24 20:57] – sestst
+++ fhz1000pcport [2018/11/03 02:59] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-{{port64.png|}}
+{{:server:hw64.png?nolink|}}
 ====== FHZ1000PcPort ======
-This module is a part of the [[NetHomeServer]]. The FHZ1000PcPort is used to communicate with a hardware device called [[FHZ1000Pc]]. The [[FHZ1000Pc]] gives access to the FS20 radio protocol which is used to control and monitor devices like dimmers, lamps, heating and switches.
+This module is a part of the [[:start|NetHomeServer]]. The FHZ1000PcPort is used to communicate with a hardware device called [[FHZ1000Pc]]. The [[FHZ1000Pc]] gives access to the FS20 radio protocol which is used to control and monitor devices like dimmers, lamps, heating and switches.
@@ Line 20: / Line 19: @@
   * Receives **FS20Command(HouseCode, DeviceCode, Value)** Will send the received command to the specified address. All parameters are in integer format, not the FS20 1-4-Format.
   * Emits **FS20Event(HouseCode, DeviceCode, Value)** This event is emitted when an FS20 command is received from the [[FHZ1000Pc]].
+The values in the events are FS20-commands which are the following:
+^Value   ^ Command         ^
+|0       |Off                  |
+|1-16    |Dim to abs. position |
+|17      |On               |
+|18      |Dim Loop         |
+|19      |Dim down         |
+|20      |Dim up           |
+|21      |Flip On/Off      |
 ==== See also ====
-[[FHZ1000PC]], [[NetHomeServer]], [[FS20Lamp]], [[FS20RemapButton]]
+[[FHZ1000PC]], [[:start|NetHomeServer]], [[FS20Lamp]], [[FS20RemapButton]], [[fs20]]