User Tools

Site Tools


fs20lamp

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
fs20lamp [2008/09/14 21:54] – created seststfs20lamp [2018/11/03 02:59] (current) – external edit 127.0.0.1
Line 1: Line 1:
-{{port64.png|}}+{{:server:lamp64_off.png?nolink|}}
 ====== FS20Lamp ====== ====== FS20Lamp ======
-This module is a part of the [[NetHomeServer]]. The FS20Lamp is not yet documented.+This module is a part of the [[:start|NetHomeServer]]. The FS20Lamp is an interface to FS20 switch and dimmer devicesVia this object lamps or other devices connected to FS20 switches or dimmers may be controlled. The FS20Lamp needs a FHZ1000PcPort to transmit the commands. 
 ===== Attributes ===== ===== Attributes =====
-  * **State** //[get]//  +  * **State** //[get]// Current state of the device: “On” or “Off” 
-  * **HouseCode** //[get] [set]//  +  * **HouseCode** //[get] [set]// House code of corresponding device 
-  * **DeviceCode** //[get] [set]//  +  * **DeviceCode** //[get] [set]// Device code of corresponding device 
-  * **FHZ1000PcPort** //[get] [set]// +  * **FHZ1000PcPort** //[get] [set]// FHZ1000PcPort to use to send the FS20 commands. This may be left blank, and in that case the message is sent by all FHZ1000PcPort-ports attached to the server.
 ===== Actions ===== ===== Actions =====
-  * **on**   +  * **on** Turn the device on 
-  * **off**   +  * **off**  Turn the device off 
-  * **bright**   +  * **bright** Increase brightness of a dimmer device one step 
-  * **dim**   +  * **dim** Decrease brightness of a dimmer device one step  
-  * **dim25**   +  * **dim25** Set brighness to 25% for a dimmer device 
-  * **dim50**   +  * **dim50** Set brighness to 50% for a dimmer device  
-  * **dim75**   +  * **dim75**  Set brighness to 75% for a dimmer device 
-  * **dim100**   +  * **dim100**  Set brighness to 100% for a dimmer device 
-  * **toggle**   +  * **toggle** Toggle On/Off-state. This is implemented by the devices themselves, so even if the FS20Lamp does not have the correct On/Off state, the actual device will toggle. 
-  * **dimLoop**  +  * **dimLoop** Increase/Decrease brighness level one step (in a loop up and down)
 ==== See also ==== ==== See also ====
-[[NetHomeServer]] +[[:start|NetHomeServer]], [[FS20]], [[FHZ1000PcPort]]
-r]]+
fs20lamp.1221422058.txt.gz · Last modified: 2018/11/03 02:57 (external edit)