User Tools

Site Tools


fs20lamp

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
fs20lamp [2008/09/14 21:54] seststfs20lamp [2018/11/03 02:59] (current) – external edit 127.0.0.1
Line 1: Line 1:
-{{port64.png|}}+{{:server:lamp64_off.png?nolink|}}
 ====== FS20Lamp ====== ====== FS20Lamp ======
-This module is a part of the [[NetHomeServer]]. The FS20Lamp is not yet documented.+This module is a part of the [[:start|NetHomeServer]]. The FS20Lamp is an interface to FS20 switch and dimmer devicesVia this object lamps or other devices connected to FS20 switches or dimmers may be controlled. The FS20Lamp needs a FHZ1000PcPort to transmit the commands. 
 ===== Attributes ===== ===== Attributes =====
-  * **State** //[get]//  +  * **State** //[get]// Current state of the device: “On” or “Off” 
-  * **HouseCode** //[get] [set]//  +  * **HouseCode** //[get] [set]// House code of corresponding device 
-  * **DeviceCode** //[get] [set]//  +  * **DeviceCode** //[get] [set]// Device code of corresponding device 
-  * **FHZ1000PcPort** //[get] [set]// +  * **FHZ1000PcPort** //[get] [set]// FHZ1000PcPort to use to send the FS20 commands. This may be left blank, and in that case the message is sent by all FHZ1000PcPort-ports attached to the server.
 ===== Actions ===== ===== Actions =====
-  * **on**   +  * **on** Turn the device on 
-  * **off**   +  * **off**  Turn the device off 
-  * **bright**   +  * **bright** Increase brightness of a dimmer device one step 
-  * **dim**   +  * **dim** Decrease brightness of a dimmer device one step  
-  * **dim25**   +  * **dim25** Set brighness to 25% for a dimmer device 
-  * **dim50**   +  * **dim50** Set brighness to 50% for a dimmer device  
-  * **dim75**   +  * **dim75**  Set brighness to 75% for a dimmer device 
-  * **dim100**   +  * **dim100**  Set brighness to 100% for a dimmer device 
-  * **toggle**   +  * **toggle** Toggle On/Off-state. This is implemented by the devices themselves, so even if the FS20Lamp does not have the correct On/Off state, the actual device will toggle. 
-  * **dimLoop**  +  * **dimLoop** Increase/Decrease brighness level one step (in a loop up and down)
 ==== See also ==== ==== See also ====
-[[NetHomeServer]]+[[:start|NetHomeServer]], [[FS20]], [[FHZ1000PcPort]]
fs20lamp.1221422080.txt.gz · Last modified: 2018/11/03 02:57 (external edit)