{{ :cul300.jpg | CUL USB-Stick}}
====== Install CUL USB-drivers ======
To be able to use CUL on Windows, you must install the USB drivers. Windows start this process automatically the first time you plug in the CUL-stick. All you have to do is to is to point out the driver supplied with NetHomeCUL - it is located in the NetHomeCUL\drivers-directory.

Here is a step by step instruction for how this is done:

===== 1. Plug in the CUL-stick =====

===== 2. Select Driver =====
Windows will detect the new hardware and display the following requester:

{{:new_hardware.png|New Hardware}}

  * Select "No, not this time" and press //Next//

Windows will now ask you how to find the drivers:

{{:nethome_cul_usb.png|CUL USB}}

  * Select "Install from a list or specific location" and press //Next//
  * On the next page, select to browse to a specific location and browse to the NetHomeCUL\drivers-directory.
  * Press //Next//
Windows will now install the USB Serial drivers needed for CUL to work.