User Tools

Site Tools


mqttcommander
no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.


Previous revision
mqttcommander [2018/11/03 02:59] (current) – external edit 127.0.0.1
Line 1: Line 1:
 +{{::server:control64.png?nolink|}} 
 +====== MqttCommander ====== 
 +This module is a part of the [[NetHomeServer]]. The MqttCommander performs commands by sending MQTT-messages to a specified topic. You need to have at least one [[mqttclient|MqttClient]] configured and connected to a MQTT-Server, in order to send the messages. 
 +===== Attributes ===== 
 +  * **Topic** //[get] [set]// The topic the messages are sent to 
 +  * **Command1** //[get] [set]// Message to sent to perform command1 
 +  * **Command2** //[get] [set]// Message to sent to perform command2 
 +  * **Command3** //[get] [set]// Message to sent to perform command3 
 +  * **Command4** //[get] [set]// Message to sent to perform command4 
 +  * **QOS** //[get] [set]// MQTT Quality of service level 
 +  * **Retain** //[get] [set]// MQTT Retain flag 
 +  * **MqttClient** //[get] [set]// Optional identity of [[mqttclient|MqttClient]] to use to send the messages. If this is left empty, the messages will be sent by all MqttClients in the OpenNetHome Server. 
 +===== Actions ===== 
 +  * **Command1**   
 +  * **Command2**   
 +  * **Command3**   
 +  * **Command4**   
 +==== See also ==== 
 +[[NetHomeServer]]
mqttcommander.txt · Last modified: 2018/11/03 02:59 by 127.0.0.1