Differences

This shows you the differences between two versions of the page.

Link to this comparison view

mqttcommander [2018/03/25 21:16]
sestst created
mqttcommander [2018/11/03 02:59]
Line 1: Line 1:
-{{::​server:​control64.png?​nolink|}} +
-====== MqttCommander ====== +
-This module is a part of the [[NetHomeServer]]. The MqttCommander performs commands by sending MQTT-messages to a specified topic. You need to have at least one [[mqttclient|MqttClient]] configured and connected to a MQTT-Server,​ in order to send the messages. +
-===== Attributes ===== +
-  * **Topic** //[get] [set]// The topic the messages are sent to +
-  * **Command1** //[get] [set]// Message to sent to perform command1 +
-  * **Command2** //[get] [set]// Message to sent to perform command2 +
-  * **Command3** //[get] [set]// Message to sent to perform command3 +
-  * **Command4** //[get] [set]// Message to sent to perform command4 +
-  * **QOS** //[get] [set]// MQTT Quality of service level +
-  * **Retain** //[get] [set]// MQTT Retain flag +
-  * **MqttClient** //[get] [set]// Optional identity of [[mqttclient|MqttClient]] to use to send the messages. If this is left empty, the messages will be sent by all MqttClients in the OpenNetHome Server. +
-===== Actions ===== +
-  * **Command1** ​  +
-  * **Command2** ​  +
-  * **Command3** ​  +
-  * **Command4** ​  +
-==== See also ==== +
-[[NetHomeServer]]+

Personal Tools