{{::server:thermometer64.png?nolink|}}
====== OregonThermometer ======
This module is a part of the [[NetHomeServer]]. The OregonThermometer receives temperature updates over the 433MHz protocol from an Oregon Scientific sensor, so it requires that an RF-Receiver is connected to the system.
===== Attributes =====
  * **Temperature** //[get]// Current temperature value
  * **SensorModel** //[get]// Sensor model name
  * **BatteryLevel** //[get]// 
  * **TimeSinceUpdate** //[get]// Seconds since last update was received from the sensor
  * **Channel** //[get] [set]// 
  * **DeviceId** //[get] [set]// Identity of the sensor
  * **LogFile** //[get] [set]// Log file name, used for presenting graphs of the values
  * **LastUpdate** //[get]// Time when last update was received from the sensor
  * **K** //[get] [set]// Multiplication factor for the presented value. Can be used for calibration.
  * **M** //[get] [set]// Addition factor for the presented value. Can be used for calibration.
==== See also ====
[[NetHomeServer]]