x10port
This is an old revision of the document!
X10Port
This module is a part of the NetHomeServer. The X10Port manages the connection to the CM12-interface module via a serial port. The CM12-interface module can send and receive X10 commands over the mains wires. Recieved X10 messages are transmitted as Events over the internal NetHomeServer event bus.
Attributes
- ComPort [get] [set] Serial port where the CM12 is connected. For example COM1 on windows or /dev/ttyUSB0 on Linux
- State [get] Current connection state to the hardware device, “Connected” or “Not Connected”
- ReceivedMessages [get] Number of received messages
- SentMessages [get] Number of sent messages
Actions
- reconnect Tries to reconnect if the connection to the interface failed at startup.
See also
X10Port
This module is a part of the NetHomeServer. The X10Port is not yet documented.
Attributes
- ComPort [get] [set]
- State [get]
- ReceivedMessages [get]
- SentMessages [get]
Actions
- reconnect
Compatibility
Linux, Win32
See also
x10port.1223062081.txt.gz · Last modified: 2018/11/03 02:57 (external edit)