User Tools

Site Tools


homehwrec

This is an old revision of the document!


Receiver Circuits

To use the microphone as an input, you need to adjust the incoming signal level to the sensitivity of the microphone and put a capacitor in series to block the DC component introduced by most microphone inputs. The capacitor C2 is usually not needed, it is intended to remove noice.

 Reception Circuit

Here are some examples of receiver circuits: Using the UPM thermometer as RF receiver for the 433.92MHz band An RF receiver for the 433.92MHz band by Walter Krämbring

homehwrec.1286029852.txt.gz · Last modified: 2018/11/03 02:57 (external edit)