User Tools

Site Tools


huelamp

HueLamp

This module is a part of the NetHomeServer. The HueLamp-Item represents a Philips Hue remote controlled LED-lamp.

To use this Item you must first have created and configured a HueBridge-Item.

The colour of the lamp can be configured in two ways:

  • Color temperature
  • Hue,Saturation

If you just specify one vale (153-500), it will be interpreted as mired color temperature. Candle light has a temperature of 500, an incandescent bulb has a temperature of 370 (warm white), and a fluorescent tube around 285.

If you specify two values separated by a comma, the will be interpreted as hue and saturation. Hue is a wrapping value between 0 and 65535. Both 0 and 65535 are red, 25500 is green and 46920 is blue. The second value is the saturation of the light. 255 is the most saturated (colored) and 0 is the least saturated (white).

Attributes

  • State [get] Current state of the lamp (On/Off)
  • Identity [get] [set] The Identity of the lamp. Usually set via the auto configure function.
  • LampModel [get] [init] Lamp model
  • Type [get] [init] Lamp type
  • Version [get] [init] Version of firmware in the lamp
  • Brightness [get] Current brightness of the lamp (0-100)
  • OnBrightness [get] [set] Brightness of the lamp when switched on.
  • Color [get] [set] Color of the lamp (see above)
  • DimLevel1 [get] [set] Preset value, 0-100
  • DimLevel2 [get] [set] Preset value, 0-100
  • DimLevel3 [get] [set] Preset value, 0-100
  • DimLevel4 [get] [set] Preset value, 0-100

Actions

  • toggle Toggle on/off
  • on
  • off
  • bright Increase brightness
  • dim Decrease brightness
  • dim1 Set brightness to preset level 1
  • dim2 Set brightness to preset level 2
  • dim3 Set brightness to preset level 3
  • dim4 Set brightness to preset level 4

See also

huelamp.txt · Last modified: 2018/11/03 02:59 by 127.0.0.1