{{:server:hw64.png?nolink|}}
====== AudioProtocolTransmitter ======
This module is a part of the [[NetHomeServer]]. The AudioProtocolTransmitter receives protocol message events and transmits them as pulses on the specified audio channel. The following protocols are currently supported:

  * Nexa_Message
  * NexaL_Message
  * Deltronic_Message
  * X10_Message
  * Pronto_Message

Some kind of transmitting hardware is needed to convert the audio signals from the speaker output into an RF or IR signal.

===== Attributes =====
  * **SourceNumber** //[get] [set]// The number of the audio channel to use as output
  * **Source 0** //[get]// Name of audio channel 0
  * **Source 1** //[get]// Name of audio channel 1 
  * **Source 2** //[get]// Name of audio channel 2
  * **Source 3** //[get]// Name of audio channel 3 
  * **Source 4** //[get]// Name of audio channel 4 
  * **Source 5** //[get]// Name of audio channel 5 
  * **FlankSwing** //[get] [set]// The level of the output signal [1 - 127]. 
===== Actions =====
  * **PlayTestBeep**  Will transmitt a short square wave output of 2KHz for 0.8 seconds. This is used for test purposes.
==== See also ====
[[NetHomeServer]]