===== UPM_Message =====
^Attribute^Value^Description^
|Name | UPM_Message | Name of the event |
|Direction | In or OUT | Direction of message, in or out from the server|
|UPM.HouseCode| 0-15 | |
|UPM.DeviceCode| 1-4 | |
|UPM.Primary| 0-2048 | Raw main value of message, normally temperature. Value is (temp + 50) * 16 |
|UPM.Secondary| 0-255 | Raw secondary value, normally humidity.|
|UPM.LowBattery| 0/1 | Signals low battery in device |

===== Nexa_Message =====
^Attribute^Value^Description^
|Name | //Nexa_Message// | Name of the event |
|Direction | //In// or //Out// | Direction of message, in or out from the server|
|Nexa.HouseCode| 0 - 7 | |
|Nexa.Button| 1 - 8 | |
|Nexa.Command| 0/1 | Off / On |

===== NexaL_Message =====
^Attribute^Value^Description^
|Name | //NexaL_Message// | Name of the event |
|Direction | //In// or //Out// | Direction of message, in or out from the server|
|NexaL.Address| 0 - 67108863 | |
|NexaL.Button| 1 - 17 | Pressed button, 17 is a special "group" button which affects all units on the address |
|NexaL.Command| 0/1 | Off / On |

===== Deltronic_Message =====
^Attribute^Value^Description^
|Name | //Deltronic_Message// | Name of the event |
|Direction | //In// or //Out// | Direction of message, in or out from the server|
|Deltronic.Address| 0 - 63 | |
|Deltronic.Button| 0 - 3 | |
|Deltronic.Command| 0/1 | Off / On |

===== Pronto_Message =====
^Attribute^Value^Description^
|Name | //Pronto_Message// | Name of the event |
|Direction | //In// or //Out// | Direction of message, in or out from the server|
|Pronto.Message| Message | The Pronto encoded message string |