{{::server:control64.png?nolink|}}
====== MqttCommander ======
This module is a part of the [[NetHomeServer]]. The MqttCommander performs commands by sending MQTT-messages to a specified topic. You need to have at least one [[mqttclient|MqttClient]] configured and connected to a MQTT-Server, in order to send the messages.
===== Attributes =====
  * **Topic** //[get] [set]// The topic the messages are sent to
  * **Command1** //[get] [set]// Message to sent to perform command1
  * **Command2** //[get] [set]// Message to sent to perform command2
  * **Command3** //[get] [set]// Message to sent to perform command3
  * **Command4** //[get] [set]// Message to sent to perform command4
  * **QOS** //[get] [set]// MQTT Quality of service level
  * **Retain** //[get] [set]// MQTT Retain flag
  * **MqttClient** //[get] [set]// Optional identity of [[mqttclient|MqttClient]] to use to send the messages. If this is left empty, the messages will be sent by all MqttClients in the OpenNetHome Server.
===== Actions =====
  * **Command1**  
  * **Command2**  
  * **Command3**  
  * **Command4**  
==== See also ====
[[NetHomeServer]]