{{::server:control64.png?nolink|}}
====== NexaLCAdvancedRemapButton ======
This module is a part of the [[NetHomeServer]]. The NexaLCAdvancedRemapButton is used to control actions in NetHomeServer with a Nexa remote control (or wall switch). Position has an on-button and an off-button.

you can map separate actions for when you press the button, release the button and release after having pressed for a longer time. Action on release is useful when you want the action to send commands using the same radio band as the button uses. 

===== Attributes =====
  * **State** //[get]// If the item is activated or not
  * **Address** //[get] [set]// Address of the remote
  * **Button** //[get] [set]// button number
  * **PressOn** //[get] [set]// Action when on button is pressed
  * **ReleaseOn** //[get] [set]// Action when on button is released
  * **ReleaseLongOn** //[get] [set]// Action when on button is released after being pressed a longer time
  * **PressOff** //[get] [set]// Action when off button is pressed
  * **ReleaseOff** //[get] [set]// Action when on button is released
  * **ReleaseLongOff** //[get] [set]// Action when off button is released after being pressed a longer time
  * **HoldOffTime** //[get] [set]// How long time shall pass (in ms) without a signal to regard the button as released
  * **LongPressTime** //[get] [set]// How long time you need to press the button (in ms) to regard it as a long time
===== Actions =====
  * **on**  
  * **off**  
  * **enable**  
  * **disable**  
==== See also ====
[[NetHomeServer]]