{{gauge.png| An Item in the Gauges Category}}
====== UPMHygrometer ======
This module is a part of the [[start | NetHomeServer]]. The UPMHygrometer receives UPM-messages and decodes the moisture value. The UPMThermometer requires an interface port which can receive UPM-messages from a receiver, for example an [[audioprotocolparser|AudioProtocolParser]].

===== Attributes =====
  * **Humidity** //[get]// The actual humidity in %
  * **BatteryStatus** //[get]// Status of the battery in the wireless sensor (Ok or Bad)
  * **HouseCode** //[get] [set]// House code part of the address of the sensor
  * **DeviceCode** //[get] [set]// Device code part of the address of the sensor 
  * **LogFile** //[get] [set]// Optional name (and path) of a file where measured values are stored once every 15 minutes.
  * **LastUpdate** //[get]// Time of the latest update received from the sensor. Normally the sensor sends an update once a minute.
  * **K** //[get] [set]// Conversion constant used to calibrate. Normally set to 0.5
  * **M** //[get] [set]// Conversion constant used to calibrate. This value is added to the measured value. Normally set to 0

==== See also ====
[[start | NetHomeServer]]