Differences

This shows you the differences between two versions of the page.

--- analyzer:manual:start [2010/04/26 21:51] – created sestst
+++ analyzer:manual:start [2018/11/03 02:59] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Protocol Analyzer Manual ======
+{{:analyzer:manual:radar48.png |}} ===== ProtocolAnalyzer Manual =====
-The protocol Analyzer Tool is intended to help analyzing and decoding slow pulse based protocols such as IR-remote protocols and RF lamp switch protocols. The Analyzer has protocol decoders for a number of standard protocols and can decode the parameters from them. It can also help analyzing the signals of unknown protocols and help in building decoders for new protocols. Below is the main window of the Protocol Analyzer:
+\\
+====== Introduction ======
+The protocol Analyzer Tool is intended to help analyzing and decoding slow pulse based protocols such as IR-remote protocols and RF lamp switch protocols. The Analyzer has protocol decoders for a number of standard protocols and can decode the parameters from them. It can also help analyzing the signals of unknown protocols and help in building decoders for new protocols.
-{{:analyzer:manual:main_window.png| Analyzer main window}}
+Currently there are two ways of interfacing the analyzer:
-The large section in the middle of the screen is where new detected signals are presented. The signals can be of two sorts: Decoded or Raw. A decoded signal is when an active decoder has managed to decode it and presents the name of the protocol and other basic information about the signal. A raw signal is the undecoded sample with detected pulses.
+  * Audio Input
+  * the CUL-USB Stick
+The manual consists of the following sections:
+  * [[analyzer:manual:main_window|Main Window]]
+  * [[analyzer:manual:settings|Settings]]
+  * [[analyzer:manual:decoders|Decoders]]
+  * [[analyzer:manual:undecoded_window|Signal Analysis]]
+  * [[analyzer:manual:export|Export Data]]
+  * [[analyzer:hardware|Hardware Interface]]
+\\
+----
+[[analyzer:manual:main_window|{{ :analyzer:manual:arrow_right_blue.png|Next - Main Window}}]]