User Tools

Site Tools


analyzer:manual:start

ProtocolAnalyzer Manual


Introduction

The protocol Analyzer Tool is intended to help analyzing and decoding slow pulse based protocols such as IR-remote protocols and RF lamp switch protocols. The Analyzer has protocol decoders for a number of standard protocols and can decode the parameters from them. It can also help analyzing the signals of unknown protocols and help in building decoders for new protocols.

Currently there are two ways of interfacing the analyzer:

  • Audio Input
  • the CUL-USB Stick

The manual consists of the following sections:



Next - Main Window

analyzer/manual/start.txt · Last modified: 2018/11/03 02:59 by 127.0.0.1