This module is a part of the NetHomeServer. The FHZ1000PcPort is used to communicate with a hardware device called FHZ1000Pc. The FHZ1000Pc gives access to the FS20 radio protocol which is used to control and monitor devices like dimmers, lamps, heating and switches. The FHZ1000Pc is connected to the server via USB.

• Delay [get] [set] Between each command the execution halts for the duration of this delay. The delay is specified in seconds and allows fractions like 0.5.
• Command1 [get] [set] The first Command to be executed at the action of the Scene. Se above for syntax.
• Command2 [get] [set] The second Command to be executed at the action of the Scene. Se above for syntax.
• Command3 [get] [set] The third Command to be executed at the action of the Scene. Se above for syntax.
• Command4 [get] [set] The fourth Command to be executed at the action of the Scene. Se above for syntax.

• Action This command activates the Scene.
• Off Explicitly calls the defined OffCommand. This does not affect the schedule.

Command Port Syntax