AudioProtocolTransmitter

This module is a part of the NetHomeServer. The AudioProtocolTransmitter receives protocol message events and transmits them as pulses on the specified audio channel. The following protocols are currently supported:

  • Nexa_Message
  • NexaL_Message
  • Deltronic_Message
  • X10_Message
  • Pronto_Message

Some kind of transmitting hardware is needed to convert the audio signals from the speaker output into an RF or IR signal.

Attributes

  • SourceNumber [get] [set] The number of the audio channel to use as output
  • Source 0 [get] Name of audio channel 0
  • Source 1 [get] Name of audio channel 1
  • Source 2 [get] Name of audio channel 2
  • Source 3 [get] Name of audio channel 3
  • Source 4 [get] Name of audio channel 4
  • Source 5 [get] Name of audio channel 5
  • FlankSwing [get] [set] The level of the output signal [1 - 127].

Actions

  • PlayTestBeep Will transmitt a short square wave output of 2KHz for 0.8 seconds. This is used for test purposes.

See also


Personal Tools