analyzer:manual:undecoded_window
This is an old revision of the document!
Undecoded Window
The undecoded window is the heart of the analyzer. Here you can see the raw undecoded signal and analyze the pulses.
Nr | Explanation |
---|---|
1 | Signal folder selected. In this view you see the signal time line |
2 | The analog signal received from the audio device. If the CUL device is used, this is not available (red line) |
3 | The pulse interpretation of the analog signal (blue line). The flank detector uses the flank settings to detect pulses in the analog signal. The result of that analysis is presented here |
4 | Pulses matching the selected pulse group (green line). Select a pulse length group below to see which pulses in the signal matches that length |
5 | Pulse group window |
To help analyzing new protocols, the received pulses are grouped according to pulse length. Pulses which are within 10% of each other in length are grouped, and the groups are sorted according to the number of pulses in each group. When a group is selected, all pulses within that group are marked with a green line in the graph.
You can zoom in on any part of the graph by selecting the upper left corner of the area you want to zoom in on and drag the cursor to the lower left corner of the area and then releasing the button:
analyzer/manual/undecoded_window.1272394963.txt.gz · Last modified: 2018/11/03 02:57 (external edit)