analyzer:manual:undecoded_window
This is an old revision of the document!
Undecoded Window
The undecoded window is the heart of the analyzer. Here you can see the raw undecoded signal and analyze the pulses. The Windows is opened by double clicking on a raw message line
Nr | Explanation |
---|---|
1 | Signal folder selected. In this view you see the signal time line |
2 | The analog signal received from the audio device. If the CUL device is used, this is not available (red line) |
3 | The pulse interpretation of the analog signal (blue line). The flank detector uses the flank settings to detect pulses in the analog signal. The result of that analysis is presented here |
4 | Pulses matching the selected pulse group (green line). Select a pulse length group below to see which pulses in the signal matches that length |
5 | Pulse group window |
Pulse Groups
To help analyzing new protocols, the received pulses are grouped according to pulse length. Pulses which are within 10% of each other in length are grouped, and the groups are sorted according to the number of pulses in each group. When a group is selected, all pulses within that group are marked with a green line in the graph.
Zoom
analyzer/manual/undecoded_window.1272401750.txt.gz · Last modified: 2018/11/03 02:57 (external edit)