Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
audioprotocoltransmitter [2009/06/15 22:47]
sestst created
audioprotocoltransmitter [2014/01/05 15:22]
sestst
Line 1: Line 1:
-{{port64.png|}}+{{:server:hw64.png?nolink|}}
 ====== AudioProtocolTransmitter ====== ====== AudioProtocolTransmitter ======
 This module is a part of the [[NetHomeServer]]. The AudioProtocolTransmitter receives protocol message events and transmits them as pulses on the specified audio channel. The following protocols are currently supported: This module is a part of the [[NetHomeServer]]. The AudioProtocolTransmitter receives protocol message events and transmits them as pulses on the specified audio channel. The following protocols are currently supported:
Line 8: Line 8:
   * X10_Message   * X10_Message
   * Pronto_Message   * Pronto_Message
 +
 +Some kind of transmitting hardware is needed to convert the audio signals from the speaker output into an RF or IR signal.
  
 ===== Attributes ===== ===== Attributes =====
   * **SourceNumber** //[get] [set]// The number of the audio channel to use as output   * **SourceNumber** //[get] [set]// The number of the audio channel to use as output
-  * **Source 0** //[get]//  +  * **Source 0** //[get]// Name of audio channel 0 
-  * **Source 1** //[get]//  +  * **Source 1** //[get]// Name of audio channel 1  
-  * **Source 2** //[get]//  +  * **Source 2** //[get]// Name of audio channel 2 
-  * **Source 3** //[get]//  +  * **Source 3** //[get]// Name of audio channel 3  
-  * **Source 4** //[get]//  +  * **Source 4** //[get]// Name of audio channel 4  
-  * **Source 5** //[get]//  +  * **Source 5** //[get]// Name of audio channel 5  
-  * **FlankSwing** //[get] [set]// the output level [1 - 127]. +  * **FlankSwing** //[get] [set]// The level of the output signal [1 - 127]. 
 ===== Actions ===== ===== Actions =====
   * **PlayTestBeep**  Will transmitt a short square wave output of 2KHz for 0.8 seconds. This is used for test purposes.   * **PlayTestBeep**  Will transmitt a short square wave output of 2KHz for 0.8 seconds. This is used for test purposes.

Personal Tools