An Item in the Gauges Category

UPMHygrometer

This module is a part of the NetHomeServer. The UPMHygrometer receives UPM-messages and decodes the moisture value. The UPMThermometer requires an interface port which can receive UPM-messages from a receiver, for example an AudioProtocolParser.

Attributes

  • Humidity [get] The actual humidity in %
  • BatteryStatus [get] Status of the battery in the wireless sensor (Ok or Bad)
  • HouseCode [get] [set] House code part of the address of the sensor
  • DeviceCode [get] [set] Device code part of the address of the sensor
  • LogFile [get] [set] Optional name (and path) of a file where measured values are stored once every 15 minutes.
  • LastUpdate [get] Time of the latest update received from the sensor. Normally the sensor sends an update once a minute.
  • K [get] [set] Conversion constant used to calibrate. Normally set to 0.5
  • M [get] [set] Conversion constant used to calibrate. This value is added to the measured value. Normally set to 0

See also


Personal Tools